Bizimlə edin:cuqquldamaqPinterestfacebookyoutubeLinkedInGoogle

dil

  • ingilis
  • fars
  • Fransız
  • hindi
  • yapon
  • Koreya
  • italyan
  • portuguese
  • rus
  • ispan
  • thai
  • türk
Dongguan Taijishan Machinery Equipment Co. Ltd. Banner
ev » Məhsullar » Feeder
  • /img/gripper_feeder_for_high_speed_press_line.jpg
  • High Speed ​​Press Line Gripper Feeder

High Speed ​​Press Line Gripper Feeder

Mechanical driver device for material feeder, Applied with swing sheel transfer cam. Material feed degree on 165 . With degree 15 stop area in the end of cam design. Pre-pressure between middle of cam and accompany device. It will make sure zero gap and high-precision material feed.

Bizimlə əlaqə saxlayın

  • Product Description
  • Packaging & Shipping
  • Bizim xidmətlər
  • FAQ
  • INQUIRY
  • Related Product
Product Description

cam cam design.Pre təzyiqli orta sonunda 165 ° ilə 15 ° stop sahəsində swing tam transfer cam.Material feed dərəcəsi ilə və müşayiət material feeder.Applied mexaniki sürücü cihaz device.It əmin sıfır boşluğu edəcək və yüksək dəqiqlikli material feed.

Surface contact design with material press area.It will decrease the pressure on the material surface.No scratch issues happen even if soft material.
Clutch cam and swing wheel cam drive by the same device.Clutch cam be assembled with moving press plate cam,Fixed press cam and guided cam,It will drive the clippers under all different plates moving up and down.So finished the necessary release and press activity during in material feeder.
Material feed length will be adjusted by the face side hand-roll. During the operating also you can change the material feed length.Material tenth will be showed in digital display with 1% millimeters precision.
Material thickness change will be adjusted by the left side bolt,And will be confirmed with the face side dial device.
Very easy to clean the material guider.Clippers because all drive devices be designed in under material feeder surface.
Texniki məlumatlar
Feeder Length 0-80 mm
Feeder Width 8-80 mm
Max material Thickness 2.0 mm
Material Direction soldan sağa
Yer Install Sol
Deive axis round direction CW / CCW
Feeder Angle 165 Degree
Release Gap 0.5 mm
Press Gap 0.1 mm
Release Angle 60 Degree
Press Plate Width 500 mm (Center max with 6 mm)
Hava təzyiqi Min 0.44 mpa
Packaging & Shipping

Göndərmə: Worldwide

Bizim xidmətlər

Worldwide xidmət

FAQ

Bu feeder ayrı satmaq olar?

No, only come together with the press machine.

Əlaqə

menyu
G|translate Your license is inactive or expired, please subscribe again!