Follow Us:Twitterpaysage pinterestromaniafratiiMihaelagoogle

lingua

  • inglese
  • peruviana
  • francese
  • lingua hindi
  • giapponese
  • Korean
  • italiano
  • portuguesa
  • russo
  • spagnolu
  • tailandese
  • turco
Dongguan Taijishan Agriculture Agriculture Co. art Banner
Home » Products » feeder
  • /img/gripper_feeder_for_high_speed_press_line.jpg
  • Grippers feeder di High Line Press Speed

Grippers feeder di High Line Press Speed

Mechanical driver device for material feeder, Applied with swing sheel transfer cam. Material feed degree on 165 . With degree 15 stop area in the end of cam design. Pre-pressure between middle of cam and accompany device. It will make sure zero gap and high-precision material feed.

Cuntatta ci

  • Description Product
  • Packaging & Francesco Parisi
  • i nostri servizii
  • FAQ
  • Enquiry
  • product Related
Description Product

aparechju cunduttore miccanicu di feeder.Applied materia cù u trasfirimentu rota pianiste gradu alimenti cam.Material su 165 ° .With 15 spaziu riparu ° à la fini di la camma design.Pre-prissioni menzu di camma è viaghja device.It farà di sicuru difettu zeru e high-pricisioni alimenti materiale.

Surface contact design with material press area.It will decrease the pressure on the material surface.No scratch issues happen even if soft material.
Clutch cam and swing wheel cam drive by the same device.Clutch cam be assembled with moving press plate cam,Fixed press cam and guided cam,It will drive the clippers under all different plates moving up and down.So finished the necessary release and press activity during in material feeder.
Material feed length will be adjusted by the face side hand-roll. During the operating also you can change the material feed length.Material tenth will be showed in digital display with 1% millimeters precision.
Material thickness change will be adjusted by the left side bolt,And will be confirmed with the face side dial device.
Very easy to clean the material guider.Clippers because all drive devices be designed in under material feeder surface.
di dati tecnica
Feeder Length 0-80 MM
Feeder Width 8-80 MM
Max material Thickness 2.0 MM
Material Direction Manca à dritta
stallà Location manca
Deive axis round direction CW / CCW
Feeder Angle 165 Laurea
Release Gap 0.5 MM
Press Gap 0.1 MM
Release Angle 60 Laurea
Press Plate Width 500 mm (Center max with 6 mm)
pressure Air Min 0.44 mpa
Packaging & Francesco Parisi

Corsica Ferries: Tania

i nostri servizii

serviziu Tania

FAQ

Ùn stu feeder vendi seperately?

No, only come together with the press machine.

Cuntatta ci

Menu
G|translate Your license is inactive or expired, please subscribe again!