Gripper Feeder for High Speed Press Line
Mechanical driver device for material feeder, Applied with swing sheel transfer cam. Material feed degree on 165 . With degree 15 stop area in the end of cam design. Pre-pressure between middle of cam and accompany device. It will make sure zero gap and high-precision material feed.
Product Description
Mechanical driver device for material feeder.Applied with swing wheel transfer cam.Material feed degree on 165°.With 15° stop area in the end of cam design.Pre-pressure middle of cam and accompany device.It will make sure zero gap and high-precision material feed.
Surface contact design with material press area.It will decrease the pressure on the material surface.No scratch issues happen even if soft material.
Clutch cam and swing wheel cam drive by the same device.Clutch cam be assembled with moving press plate cam,Fixed press cam and guided cam,It will drive the clippers under all different plates moving up and down.So finished the necessary release and press activity during in material feeder.
Material feed length will be adjusted by the face side hand-roll. During the operating also you can change the material feed length.Material tenth will be showed in digital display with 1% millimeters precision.
Material thickness change will be adjusted by the left side bolt,And will be confirmed with the face side dial device.
Very easy to clean the material guider.Clippers because all drive devices be designed in under material feeder surface.
Technical data
Feeder Length | 0-80 mm |
Feeder Width | 8-80 mm |
Max material Thickness | 2.0 mm |
Material Direction | Left to right |
Install Location | Left |
Deive axis round direction | CW / CCW |
Feeder Angle | 165 Degree |
Release Gap | 0.5 mm |
Press Gap | 0.1 mm |
Release Angle | 60 Degree |
Press Plate Width | 500 mm (Center max with 6 mm) |
Air Pressure | Min 0.44 mpa |
Packaging & Shipping
Shipping: Worldwide
Our services
Worldwide service
FAQ
Does this feeder sell seperately?
No, only come together with the press machine.
Contact Us
Products
Contact Us
- Company Address: Foao Industial Zone,Meijingxi Road, Xiniupi Dalang Town, Dongguan City, Guangdong Province, China
- Tel: +86 769 85634419
- Contact Mary
- Mob: +86 15215267798
- Email: meirongmou@gmail.com