Biyo Mu:twitterSharonfacebookyoutubelinkedingoogle

Harshe

  • Turanci
  • Persian
  • Faransa
  • hindi
  • Japan
  • korean
  • italian
  • Portuguese
  • Rasha
  • Mutanen Espanya
  • Sauna
  • turkish
Dongguan Taijishan Farms Boats Co. Ltd. Banner
Gida » Products » Feeder
  • /img/gripper_feeder_for_high_speed_press_line.jpg
  • Gripper Feeder for High Speed ​​Danna Line

Gripper Feeder for High Speed ​​Danna Line

Mechanical driver device for material feeder, Applied with swing sheel transfer cam. Material feed degree on 165 . With degree 15 stop area in the end of cam design. Pre-pressure between middle of cam and accompany device. It will make sure zero gap and high-precision material feed.

Saduwa da mu

  • Samfur Description
  • Marufi & Shipping
  • Our sabis
  • FAQ
  • BINCIKE
  • related Product
Samfur Description

Inji direban na'urar ga kayan feeder.Applied da lilo dabaran canja wurin cam.Material feed mataki a kan 165 ° .Da 15 ° tasha yanki a karshen cam design.Pre-matsa lamba tsakiyar cam kuma bi device.It zai tabbatar sifili rata da kuma high-daidaici kayan abinci.

Surface contact design with material press area.It will decrease the pressure on the material surface.No scratch issues happen even if soft material.
Clutch cam and swing wheel cam drive by the same device.Clutch cam be assembled with moving press plate cam,Fixed press cam and guided cam,It will drive the clippers under all different plates moving up and down.So finished the necessary release and press activity during in material feeder.
Material feed length will be adjusted by the face side hand-roll. During the operating also you can change the material feed length.Material tenth will be showed in digital display with 1% millimeters precision.
Material thickness change will be adjusted by the left side bolt,And will be confirmed with the face side dial device.
Very easy to clean the material guider.Clippers because all drive devices be designed in under material feeder surface.
Technical data
Feeder Length 0-80 mm
Feeder Width 8-80 mm
Max material Thickness 2.0 mm
Material Direction Hagu zuwa dama
shigar Location Hagu
Deive axis round direction CW / CCW
Feeder Angle 165 Degree
Release Gap 0.5 mm
Press Gap 0.1 mm
Release Angle 60 Degree
Press Plate Width 500 mm (Center max with 6 mm)
Air Matsa Min 0.44 mpa
Marufi & Shipping

Shipping: Worldwide

Our sabis

Worldwide sabis

FAQ

Shin wannan Feeder sayar seperately?

No, only come together with the press machine.

Tuntube Mu

Menu
G|translate Your license is inactive or expired, please subscribe again!