Gripper High Speed Пресс-Line үчүн Feeder
Mechanical driver device for material feeder, Applied with swing sheel transfer cam. Material feed degree on 165 . With degree 15 stop area in the end of cam design. Pre-pressure between middle of cam and accompany device. It will make sure zero gap and high-precision material feed.
продукт Description
камерамдан боюнча камералуу design.Pre-басым ортосунда аягында 165 ° .Ал 15 ° бирдиктүү аянтта селкинчек дөңгөлөк өткөрүп cam.Material тоют даражасы менен коштоп, материалдык feeder.Applied үчүн механикалык айдоочу аппарат device.It сөзсүз нөл ажырым кылат жана жогорку тактык менен материалдык түрмөгү.
Surface contact design with material press area.It will decrease the pressure on the material surface.No scratch issues happen even if soft material.
Clutch cam and swing wheel cam drive by the same device.Clutch cam be assembled with moving press plate cam,Fixed press cam and guided cam,It will drive the clippers under all different plates moving up and down.So finished the necessary release and press activity during in material feeder.
Material feed length will be adjusted by the face side hand-roll. During the operating also you can change the material feed length.Material tenth will be showed in digital display with 1% millimeters precision.
Material thickness change will be adjusted by the left side bolt,And will be confirmed with the face side dial device.
Very easy to clean the material guider.Clippers because all drive devices be designed in under material feeder surface.
техникалык маалымат
| Feeder Length | 0-80 мм |
| Feeder Width | 8-80 мм |
| Max material Thickness | 2.0 мм |
| Material Direction | солдон |
| орнотуу Жайгашкан | сол |
| Deive axis round direction | CW / CCW |
| Feeder Angle | 165 Билими |
| Release Gap | 0.5 мм |
| Press Gap | 0.1 мм |
| Release Angle | 60 Билими |
| Press Plate Width | 500 mm (Center max with 6 mm) |
| аба басымы | Min 0.44 mpa |
Packaging & Shipping
Жеткирүү: Worldwide
Биздин кызматтар
Бүткүл дүйнөлүк кызматы
FAQ
Бул Жашар чачыранды сатылабы?
No, only come together with the press machine.
Байланыш
- тел: + 86 769 85634419
- Уюлдук: + 86 13712303213
- Skype: anna@tjspress.com
- Wechat: + 86 13712303213
- Email: contact@tjspress.com
- Дареги: Foao Industial Zone, Meijingxi Road, Xiniupi Dalang Таун, Dongguan шаары, Гуандун облусу, Кытай
