• anglicus
  • Persae
  • Francorum
  • Hibernica
  • Italica
  • Korean
  • Italian
  • Romancica
  • Russian
  • Spanish
  • Thai
  • Turkish
Dongguan Taijishan Machinery Co. Vexillum Equipment
domum » Products » PASTOR
  • /img/gripper_feeder_for_high_speed_press_line.jpg
  • PASTOR enim Gripper High Kessinger Publishing Versus

PASTOR enim Gripper High Kessinger Publishing Versus

Mechanical driver device for material feeder, Applied with swing sheel transfer cam. Material feed degree on 165 . With degree 15 stop area in the end of cam design. Pre-pressure between middle of cam and accompany device. It will make sure zero gap and high-precision material feed.

Nobis loquere

  • depictio producti
  • Shipping & Packaging
  • nostrum officia
  • FAQ
  • Related Products
depictio producti

Rota coegi translatio mechanica machinam in materia feeder.Applied cum adductius cam.Material feed Eis nempe gradus in 165 ° ° 15 subsisto-pressura area in fine cam design.Pre media cam device.It et adprehendent te fac quod nulla gap summus praecisione materiae cibarium.

Surface contact design with material press area.It will decrease the pressure on the material surface.No scratch issues happen even if soft material.
Clutch cam and swing wheel cam drive by the same device.Clutch cam be assembled with moving press plate cam,Fixed press cam and guided cam,It will drive the clippers under all different plates moving up and down.So finished the necessary release and press activity during in material feeder.
Material feed length will be adjusted by the face side hand-roll. During the operating also you can change the material feed length.Material tenth will be showed in digital display with 1% millimeters precision.
Material thickness change will be adjusted by the left side bolt,And will be confirmed with the face side dial device.
Very easy to clean the material guider.Clippers because all drive devices be designed in under material feeder surface.
Technical data
Feeder Length 0 80 mm,
Feeder Width 8 80 mm,
Max material Thickness 2.0 mm
Material Direction Reliquit ad ius
Location install reliquit
Deive axis round direction CW / CCW
Feeder Angle 165 Degree
Release Gap 0.5 mm
Press Gap 0.1 mm
Release Angle 60 Degree
Press Plate Width 500 mm (Center max with 6 mm)
Air OPPRESSUS Min 0.44 mpa
Shipping & Packaging

Shipping: Worldwide

nostrum officia

servitium worldwide


Haec satietas appáreat vendere?

No, only come together with the press machine.

Contact Us

G|translate Your license is inactive or expired, please subscribe again!