• English
  • Persian
  • French
  • Hindi
  • Japanese
  • Korean
  • Chitaliyana
  • Portuguese
  • Russian
  • Spanish
  • Thai
  • Turkey
Dongguan Taijishan Machinery Zida Co. Ltd. Chabwino
Home » Zamgululi » wodyetsa
  • /img/gripper_feeder_for_high_speed_press_line.jpg
  • Gripper wodyetsa kwa High Liwiro Press Line

Gripper wodyetsa kwa High Liwiro Press Line

Mechanical driver device for material feeder, Applied with swing sheel transfer cam. Material feed degree on 165 . With degree 15 stop area in the end of cam design. Pre-pressure between middle of cam and accompany device. It will make sure zero gap and high-precision material feed.

Lumikizanani nafe

  • Mafotokozedwe Akatundu
  • Malawi Kutumiza
  • misonkhano yathu
  • FAQ
  • Kufufuza
  • Mankhwala Related
Mafotokozedwe Akatundu

Mawotchi dalaivala chipangizo kwa feeder.Applied zakuthupi ndi kugwedezeka gudumu kutengerapo cam.Material chakudya digiri pa 165 ° .With 15 ° amasiya malo mapeto a kamera design.Pre-kuthamanga pakati pa kamera ndi ayende device.It adzaonetsetsa ziro kusiyana ndi mkulu-mwatsatanetsatane chakudya zakuthupi.

Surface contact design with material press area.It will decrease the pressure on the material surface.No scratch issues happen even if soft material.
Clutch cam and swing wheel cam drive by the same device.Clutch cam be assembled with moving press plate cam,Fixed press cam and guided cam,It will drive the clippers under all different plates moving up and down.So finished the necessary release and press activity during in material feeder.
Material feed length will be adjusted by the face side hand-roll. During the operating also you can change the material feed length.Material tenth will be showed in digital display with 1% millimeters precision.
Material thickness change will be adjusted by the left side bolt,And will be confirmed with the face side dial device.
Very easy to clean the material guider.Clippers because all drive devices be designed in under material feeder surface.
deta luso
Feeder Length 0-80 mamilimita
Feeder Width 8-80 mamilimita
Max material Thickness 2.0 mamilimita
Material Direction Kumanzere kupita kumanja
Ikani Location kumanzere
Deive axis round direction CW / CCW
Feeder Angle 165 Digiri
Release Gap 0.5 mamilimita
Press Gap 0.1 mamilimita
Release Angle 60 Digiri
Press Plate Width 500 mm (Center max with 6 mm)
Air Anzanu Min 0.44 mpa
Malawi Kutumiza

Kutumiza: Padziko Lonse

misonkhano yathu

utumiki lonse


Kodi wodyetsa izi kugulitsa seperately?

No, only come together with the press machine.

Lumikizanani nafe

G|translate Your license is inactive or expired, please subscribe again!